Misfortunes of Smart Wifi and Smart Bro Customers
I’ve made the mistake of enabling DHCP from http://169.254.1.1 yesterday (as a result of tinkering) because i can no longer access the Canopy page, and there is no way to disable it anywhere else. I’ve tried changing the TCP/IP Properties, but nothing really helps. After a week of not being able to connect to the internet due to Milenyo, I was finally back online earlier today, which was a surprise for i really don’t know what it is i did that made it possible! Perhaps, the towers were fixed? I have no clue. The DHCP is still enabled, i understand that it automatically assigns other users of the network their own IP address i find it unneccessary because i’m the only one who uses the service, but i really cannot understand how it worked out.
Anyway, as of now, things are going very well but I would like to know…should i be worried that the DHCP is enabled? Plus, i also want to figure out how to access the Canopy Page.. is there a manual reset function for the antenna?
Oh, the technician who came over to install the service originally set the DHCP as disabled.
Thanks.
Popularity: 4% [?]
8 Responses for "DHCP Enabled"
Chk mo pinoywifi.com for instructions
Kakailanganin mo ng Reset plug para i-reset sa default ip address ang canopy mo
Ano nga pala yung Ip address n nakukuha mo ngayon?
At ano yung na try mo n ipalit don sa TCP/IP mo?
alam mo ba which version ang SW ng SM mo?
Yellow background ba or white background? Yellow – 7.2.9 or 7.3.6/ white = 8.0
Magkaiba kasi ang configuration ng dalawang version na ito. Magkaiba din ang effects depending on what DHCP setting is enabled (client or server?)
What cympaulife is instructing is to use a default plug to override the configuration and boot up the SM using factory presets. If factory preset – 169.254.1.1 is the default access IP – just make sure your PC is in the same network (169.254.1.x).
This is the method to access the configuration of the SM manually.
Here’s the easy solution to that. Open your SmartWifi connection properties (yung nasa Network Connections). Afterwards, go to the TCP/IP properties, set an IP address of anything except for 169.254.1.1 (I personally use 169.254.2.1). Afterwards, click ok. You should now be able to access the Canopy Page. Now disable DHCP, then click ‘Save’, then click ‘Reboot’. Once your connection disconnects, set the TCP/IP settings to ‘get an IP address automatically’ again, then click ok.
heheh! ako rin na enable ko ung DHCP ko! kaya di ko n rin ma access ung canopy ko! so ganito ang ginawa ko. matagal akong nag isip kung anong gagawin ko. kaya nag browse ako sa net and nakita ko itong site n ito. tapos may nabasa akong pang reset daw ng canopy so nabuhayan ako ng lakas ginawa ko ung pang reset ng canopy ! ehehhe! uun !! wala pa ring nangyari ganon parin di ko pa rin ma access ung canopy ko! nag isip ulit ako baka magawan ko pa ng paraan. so tinignan ko ung cable ko ng canopy from d module to my computer and may nakita n nman ako.!! parang tanggal ung pag kakakrimp ng cable ko malapit sa PC ko. kaya uun! pinutol ko and ni-re-krimp ko un. eheheh!! wala paring nangyari. kaya lalong nawalan ako ng conection. mga ilang days akong walang net. dahil sa kalokohan ko!! ehehhe tanga nga!! and then may nabilitaan ako sa kapatid na yung bahay na nilipatan nila may naka kabit na na canopy module. kaya inakyat ko ung bubong nila tapos kinuha ko ung canopy and then inuwi ko dito sa bhay tapos pinalit ko sa canopy ko. nung una walang RSSI so ginawa ko dinala ko sa fren ko na may canopy rin and ginaya ko yung configuration ng canopy nya! and then UUUNNN may RSSI na kaya ehtoh dalawa na ung canopy ko. and may NET na ulit !!! aahhhhyyyy SARAP !! kaya di ko na ulit kakalikutin ung canopy ko. PROMIS !!! ehehehheheh add me nman sa frendster … hersonskey@yahoo.com emailnyo n rin ako. baka matulungan ko kyo for advice lang hah!! ala money eh!!
:P:P:p
ako din na enable ko ung dhcp tapos nun wala na lalong naging grabe lag ko… di ako maka download ng kahit ano lagi kc time out amf!
nakalikot ko yung canopy kasi kakainstall lng ng smart neto skn nun tapos kinagabihan nde makaconnect so ayun tinry ko magtweak sa canopy baka sakaling maayos ko, mali pala ako lalo lang lumala amf…
di dapat ako papakabit ng smart broke na to eh no choice lng tlga ako.. yung bayantel dko pde pakabit d2 kasi no right of way sila d2 sa amin, yung globe di pde kasi out of coverage na daw ako na kahit daw pakabit ako sa kanila pangit lng magiging reception ko, yung pldt naman di rin pde kailangan pa ng landline daw para makabitan ako eh ayaw pumayag ng nanay ko palitan yung number namin.
badtrip tlga! mas ok pa dialup sa smart broke na to eh.. sa dialup nakakalaro pa ako OL games eh etong smart lagi lng ako nadDC!
panu ko ba mapapabilis to? panu madisable ulit yung dhcp? dko matry yung suggestion ni pinoy_hatdog kasi dko alam anung subnet mask ang ilalagay ko.. pls help… ive already tried using meridian.ph as proxy server pero ganun pa rin sobra lag amf! helllppppppp…..=(
help din pow ung sure na maaayos ung ma didisable q ung dhcp ng canopy q need help pls pls pls….
reset plug-in lng solution dyan..
DHCP.. changes your IP address by time or day of use..
so if ever smart would like to disconnect your service. they could not do it because your IP is dynamic.. more on DHCP connections are prone to Unauthorized DHCP server and client attacks.. so its better to disable it..
may nakaka alam ba kung panu odesable ang dhcp lahat na ata ng payo d2 sa net try ko na la parin ung jumper naman d malonaw d ko masundan pls baka may alam kayo tnx.
Leave a reply